User Manual Q&AAnswer
Jan 25, 2025 - 01:51 AM
To install the Fostoria FES15243E FES-Series Heat Wave Electric Heater, follow these steps:
1. Assemble the handle: Remove the hardware securing the handle to the legs. Raise the handle until the holes align with the upper holes in the legs. Re-insert the hardware and fasten securely.
2. Wiring: The proper size SO-type feeder cable must be used for the electrical hook-up of this heater. Refer to the specifications table in the user guide to determine the appropriate cable size. The feeder cable or cable kit assembly must be made by licensed electricians only. Connect the green ground conductor on the feeder cable or cable kit to the grounding lug on the heater. Comply with all local electrical codes and the National Electric Code (NFPA70) when providing electrical power to the heater.
3. Mounting: The FES models come mounted on a two-wheeled cart with wheels designed to be easily pushed or pulled over uneven surfaces. The YES models require some assembly. Follow the instructions provided in the user guide for the specific model you have.
4. Final assembly: Once the heater is mounted and wired, make sure all the necessary parts are properly attached. Refer to the user guide for the specific model you have for the final assembly instructions.
Please note that these are general installation instructions. For specific details and illustrations, refer to the user guide provided with the Fostoria FES15243E FES-Series Heat Wave Electric Heater.
Add New Comment