How do I install the Fostoria FES-Series Heat Wave Electric Heater? (Fostoria FES30483A FES-Series Heat Wave Electric Heater User Guide)

Answer

manuals.plus

Jan 25, 2025 - 01:49 AM

To install the Fostoria FES-Series Heat Wave Electric Heater, follow these steps:

1. Assemble the handle: Remove the hardware securing the handle to the legs and raise the handle until the holes align with the upper holes in the legs. Re-insert the hardware and fasten securely.

2. Wiring: The proper size SO-type feeder cable must be used for the electrical hook-up of this heater. Refer to the specifications table in the user guide to determine the correct cable size. The feeder cable or cable kit assembly must be made by licensed electricians only. Connect the green ground conductor on the feeder cable or cable kit to the grounding lug on the heater. Comply with all local electrical codes and the National Electric Code (NFPA70) when providing electrical power to the heater.

3. Mounting: The FES models come mounted on a two-wheeled cart, while the YES models require assembly. Follow the instructions in the user guide for the specific model to assemble and mount the heater. Make sure to use the supplied mounting bracket and ensure that the surface can support the weight of the heater.

4. Operating Instructions: The FES and YES series heaters are designed to circulate room air across their heating elements to gradually increase room temperature. Use the multi-function thermostat to control the fan and heating elements. Refer to the user guide for detailed instructions on operating the heater.

Please note that these are general installation instructions. For specific details and diagrams, refer to the user guide provided with the Fostoria FES-Series Heat Wave Electric Heater.