User Manual Q&AAnswer
Jan 25, 2025 - 01:46 AM
To assemble the Cadco CBC-GG-B4-L5 4 Bay Grab & Go Mobile Merchandising Cart, follow these steps:
1. Before assembling, wash removable parts in warm sudsy water, rinse, and dry. Clean the cart with a mild detergent and a soft moist cloth. Do not use any scouring agents.
2. Place each pan holder over the cart's top warming surface, with 2 keyhole slots and 2 open slots on the inside flaps of the pan holder positioned over the 4 locking knobs on the warming surface. Press the pan holder down onto the warming surface and slide it until the knobs engage. Tighten the knobs to keep the pan holder in place.
3. Optional Adjustable Height inner shelf/shelves: Tilt the shelf up slightly and position/reposition it by resting the shelf on your choice of shelf support knobs on both sides of the cart interior. Be sure the shelf is resting securely on the 4 shelf support knobs before placing anything on the shelf.
4. Optional Security Doors: If your cart has optional swing-open or sliding doors, use the keys provided to open the lock on the doors.
5. Optional Pneumatic Wheels: If you have the optional PW-4 Pneumatic Wheels Kit, you can install them by removing the smaller casters that were factory-installed and attaching the PW-4 wheels using the same hardware and holes.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment