User Manual Q&AAnswer
Jan 25, 2025 - 01:43 AM
To change the tool on the BOSCH 18V-150 C GSR, GSB Professional Cordless Drill Driver, follow these steps:
1. Remove the battery from the power tool before carrying out any work on the tool.
2. Open the keyless chuck by turning it in the direction of rotation until the tool can be inserted.
3. Insert the tool firmly into the chuck.
4. Tighten the keyless chuck by turning it by hand in the direction of rotation until it is securely locked.
Please refer to the instruction manual for more detailed information and illustrations on how to change the tool on the BOSCH 18V-150 C GSR, GSB Professional Cordless Drill Driver.
Add New Comment