User Manual Q&AAnswer
Jan 25, 2025 - 01:37 AM
To adjust the belt tracking on the FEIN GHB 15-50 Hand-Held Belt Grinder, follow these steps:
1. Switch the machine on and check the belt tracking.
2. If the belt does not run centered, loosen the xxxx (number 8) and turn the nut (number 9) using a spanner (size 10 mm) to the right or left, as required.
3. Continue adjusting until the belt runs centered.
4. Once the belt is properly aligned, tighten the xxxx and nut securely.
It is important to regularly check the belt tracking and make adjustments as needed to ensure optimal performance and safety.
Add New Comment