User Manual Q&AAnswer
Jan 25, 2025 - 01:35 AM
To change the tool on the FEIN AMM 700 Max Select Set Cordless Oscillating Multitool, follow these steps:
1. Ensure that the power tool is switched off and the battery is removed.
2. Use the provided cover to protect yourself against hand/arm injuries when changing application tools with sharp cutting edges.
3. Do not switch on the power tool while the clamping lever is open to avoid crushes or contusions to the hand and fingers.
4. Do not reach into the area of the clamping jaws to prevent crushes or contusions to the fingers.
5. When the clamping jaws are open, pivot the clamping lever toward the front and then back again to close the clamping jaws.
6. Insert the desired application tool into the clamping jaws.
7. Guide the power tool toward the workpiece only when it is switched on.
Please refer to the FEIN AMM 700 Max Select Set Cordless Oscillating Multitool Instruction Manual for more detailed instructions and safety precautions.
Add New Comment