User Manual Q&AAnswer
Jan 25, 2025 - 12:46 AM
To attach the router to the Einhell RTB-003 Router Table, follow these steps:
1. Remove the plastic plate from the base of your router before attaching it to the table.
2. Place the router in position on the bottom of the table as centrally as possible.
3. Secure the router in position with clamps (4 clamps are recommended).
4. Make sure that the router is facing the table.
5. Once the router is in the desired position, tighten the four clamps enough to prevent it from moving while in operation.
Please refer to the "Installing the milling machine on the table" section in the instruction manual for more detailed instructions and illustrations.
Add New Comment