User Manual Q&AAnswer
Jan 25, 2025 - 12:27 AM
To install and use the equip 128955 4 Port USB 2.0 Hub, follow these steps:
1. Plug the USB hub into an available USB port on your PC or notebook.
2. The hub is USB powered, so it does not require an external power source.
3. Once connected, your computer should automatically detect and install the necessary drivers for the hub.
Note: If your computer does not automatically install the drivers, you may need to download them from the manufacturer's website.
4. After the drivers are installed, you can start using the hub.
5. Connect your USB devices to the available ports on the hub. You can connect up to four devices simultaneously.
6. The hub supports USB 2.0, which provides a maximum speed of 480Mbps. Please note that the actual transfer speed may vary depending on the connected devices and your computer's capabilities.
7. The hub is compatible with various operating systems, including Windows 7, Windows 8, Windows 10, Mac OS X 10.6 and higher, and Chrome OS.
8. The hub is suitable for low power USB devices. If you are connecting high-power devices such as external hard drives or printers, make sure they have their own power source.
9. The hub is designed for simple Plug-and-Play installation, meaning you can connect and disconnect devices without restarting your computer.
Please refer to the equip 128955 4 Port USB 2.0 Hub Owner's Manual for more detailed instructions and troubleshooting information.
Add New Comment