User Manual Q&AAnswer
Jan 24, 2025 - 11:59 PM
Installation of the Cersanit P-WP-ZEN170NL Acrylic Bathtub requires the following tools:
- Adjustable wrench
- Screwdriver
- Level
- Silicone sealant
- Tape measure
Please follow these steps for installation:
1. Precautions:
- Ensure that the floor is level and capable of supporting the weight of the bathtub.
- Make sure there are no obstructions or obstacles in the installation area.
- Read and understand all instructions before starting the installation process.
2. Preparation:
- Measure the installation area to ensure the bathtub will fit properly.
- Remove any protective packaging from the bathtub.
- Check for any damage or defects before proceeding with installation.
3. Positioning:
- Carefully position the bathtub in the desired location.
- Use a level to ensure that the bathtub is level in all directions.
- Adjust the bathtub's position as necessary.
4. Plumbing Connections:
- Connect the bathtub drain to the existing plumbing system.
- Use an adjustable wrench to tighten the connections securely.
- Ensure that all connections are watertight.
5. Sealing:
- Apply a bead of silicone sealant around the edges of the bathtub where it meets the floor and walls.
- Smooth the sealant with a finger or a caulking tool to create a watertight seal.
6. Final Checks:
- Double-check all connections and seals for any leaks.
- Test the bathtub by filling it with water and checking for any leaks or drainage issues.
- Make any necessary adjustments or repairs as needed.
Please note that this answer provides a general overview of the installation process. For specific details and diagrams, please refer to the Cersanit P-WP-ZEN170NL Acrylic Bathtub Instruction Manual provided with the product
Add New Comment