User Manual Q&AAnswer
Jan 24, 2025 - 11:39 PM
To mount and set up the SCHMERSAL AZM201Z-SK-T-1P2PW-A Safety Door Lock, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. General Mounting Instructions:
- Observe the relevant requirements of the standards ISO 12100, ISO 14119, and ISO 14120.
- Refer to the mounting instructions manual for the corresponding actuator.
- The actuator must be permanently fitted to the safety guards and protected against displacement by suitable measures (tamperproof screws, gluing, and drilling of the xxxx heads).
2. Electrical Connection:
- The electrical connection should only be carried out by authorized personnel in a de-energized condition.
- Integrate the required electrical cable fuse protection with the installation.
- The safety outputs can be integrated into the safety circuit of the control system.
- Ensure the connected safety-monitoring module has a dual-channel safety input suitable for 2 p-type semiconductor outputs.
3. Wiring Examples for Series-Wiring:
- The user must evaluate and design the safety chain in accordance with the relevant standards and the required safety level.
- The quantity of devices that can be wired in series is only limited by the cable drops and the external cable fuse protection.
- Up to 31 device variants with serial diagnostics can be wired in series.
- The entire concept of the control system, in which the safety component is integrated, must be validated to the relevant standards.
4. Set-Up and Maintenance:
- Take adequate measures to ensure protection against tampering, such as preventing tampering of the safety guard by using replacement actuators.
- Replace any damaged or defective components.
Please refer to the complete user manual for detailed instructions, including diagrams and technical specifications.
Add New Comment