User Manual Q&AAnswer
Jan 24, 2025 - 11:37 PM
To charge the APS 5/3/2 batteries using the PULSAR APS-V Battery Charger, follow these steps:
1. Insert the battery into the charger slot, ensuring that the alignment points on the battery and charger are aligned.
2. Connect the USB Type-C cable to the USB Type-C connector of the power adapter.
3. Connect the other end of the USB Type-C cable to the USB Type-C connector of the charger, removing the USB Type-A adapter if necessary.
4. Plug the power adapter into a socket with the appropriate voltage (100-240 V for international use or 110 V for the US).
5. The LED indication on the charger will display the battery charging level.
6. The APS-V charger has two slots: Slot A is for APS 5 batteries, and Slot B is for APS 3 and APS 2 batteries.
7. Please note that if you are charging an APS 5 battery with a power adapter that does not support USB fast charging technology, the charge time may increase, and it will be indicated by a slow flashing LED light.
8. During fast charging, the charger may heat up, but excess heat is removed through the radiator and does not affect the device's operation.
Please refer to the PULSAR APS-V Battery Charger User Manual for more detailed instructions and safety precautions.
Add New Comment