Answer

Jan 24, 2025 - 11:36 PM
To transfer log measurements from the Jabra Noise Guide to the Jabra Noise Guide software using the USB key, follow these steps:
1. Install the Jabra Noise Guide software on your Windows computer using the USB key provided.
2. Connect the USB key to your computer's USB port.
3. Open the Jabra Noise Guide software.
4. Click on the "Transfer" tab in the software.
5. Click on the "Transfer Log" button.
6. The software will prompt you to select the USB key as the source for log transfer. Choose the USB key from the list.
7. The software will then transfer the log measurements from the internal log of the Jabra Noise Guide to the software.
Note: Make sure that the Jabra Noise Guide is turned on and connected to the USB key before attempting to transfer the log measurements. Also, ensure that the USB key is properly inserted into the computer's USB port.
For more detailed instructions and troubleshooting tips, refer to the user manual provided with the Jabra Noise Guide or visit the Jabra Noise Guide product support page on the Jabra website.
Add New Comment