User Manual Q&AAnswer
Jan 24, 2025 - 11:25 PM
To install the tooling on the DENZEL MTL-IB-18-02 Cordless Multifunctional Tool, follow these steps:
1. Open the tooling lock mechanism by lifting the lever on the tool housing.
2. Rotate the tooling 120-140 degrees in the direction of the "UNLOCK" arrow printed on the side of the case.
3. Install the selected tooling between the clamping washer and the spindle gear, ensuring that the grooves of the tooling align with the teeth of the spindle rim.
4. Move the lever in the opposite direction to lock the tooling in place. The movable washer of the mechanism will press the tooling against the ring gear, securing it.
To remove the tooling, simply lift the lever to open the lock mechanism and rotate the tooling in the opposite direction of the "UNLOCK" arrow. Then, remove the tooling from the retainer.
Please refer to the user manual for visual illustrations and additional information on installing and removing tooling.
Add New Comment