User Manual Q&AAnswer
Jan 24, 2025 - 10:58 PM
To connect the LIGHTWARE WP-UMX-TPS-TX120 Plus-US Black transmitter to your devices, follow these steps:
1. CATx: Connect the transmitter to a compatible receiver or matrix input board using a CATx cable via the TPS connectors.
2. VGA, HDMI, DP: Connect the transmitter to your video sources using the corresponding inputs and VGA/HDMI/DisplayPort cables.
3. Audio: Optionally, connect an asymmetric audio device with an unbalanced audio signal (e.g., a VGA laptop) to the 2.5" TRS (jack) audio input port.
4. LAN: Optionally, connect the transmitter to a LAN network for device control.
5. RS-232: Optionally, connect a controller or controlled device (e.g., a relay box) to the serial port.
6. Power: Choose one of the power supply options mentioned in the manual, such as using a 48V power adapter or remote powering with compatible devices.
For more detailed instructions and illustrations, please refer to the LIGHTWARE WP-UMX-TPS-TX120 Plus-US Black User Guide.
Add New Comment