User Manual Q&AAnswer
Jan 24, 2025 - 10:56 PM
To adjust the temperature on the Duraflame V39500 Infrared Stove Heater, follow these steps:
1. Make sure the power is on by pressing the Power button on the control panel.
2. Press the HEATER button on the control panel to access the thermostat settings.
3. The default temperature is 72°F (22°C). Use the up and down buttons on the remote or the HEATER button on the control panel to increase or decrease the temperature setting.
4. The thermostat setting range is 62°F - 82°F (17°C - 27°C). You can adjust the temperature in 2°F or 1°C increments.
5. To switch between Fahrenheit (°F) and Celsius (°C), press and hold the HEATER button on the control panel for 3 seconds.
6. Once you have set the desired temperature, the heater will automatically maintain that temperature until you change it.
Please refer to the "Heater" section in the instruction manual for more detailed information and instructions.
Add New Comment