User Manual Q&AAnswer
Jan 24, 2025 - 10:44 PM
To install the ORNO OR-GM-9005 Furniture Socket, follow these steps:
1. Using a flat screwdriver, gently lever the front panel and remove it.
2. Install the socket housing at the chosen place with four screws.
3. After installation, align the sockets or the switch and put the front panel back on by pressing it into the housing.
4. Connect the round cable 3x1.5 mm2 to the domestic mains system.
5. Determine the place of installation and bring cables through the locker holes.
6. Connect the earthing wire to the yellow-green conductor, the neutral wire to the blue conductor, and the live wire to the brown conductor.
Please refer to the manual for more detailed instructions and illustrations (Fig. 1-4).
Note: It is important to disconnect the voltage of the mains before connecting the furniture socket. Make sure to follow all safety precautions mentioned in the manual, such as disconnecting the power supply before any activities on the product and not operating the device when its housing is damaged.
For any further assistance or clarification, you can contact ORNO at the provided contact information in the manual.
Add New Comment