User Manual Q&AAnswer
Jan 24, 2025 - 10:26 PM
To connect your computers and monitors to the iPGARD SA-DPN-4S 4 Port DP Secure KVM Switch, please follow these steps:
1. Make sure the power is turned off or disconnected from the unit and the computers.
2. Use DisplayPort cables to connect the DisplayPort output ports from each computer to the corresponding DP IN ports of the unit.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit.
4. Optionally, connect a stereo audio cable (3.5 mm to 3.5 mm) to connect the audio output of the computer(s) to the audio in ports of the unit.
5. Connect monitor(s) to the DP OUT console port of the unit using DisplayPort cable(s).
6. Connect a USB keyboard and mouse in the two USB console ports.
7. Optionally, connect stereo speakers to the audio out port of the unit.
Note: If you have a single-head KVM switch, you can connect one monitor. The computer connected to port 1 will always be selected by default after powering up. For the 4 port KVM, you can connect up to 4 computers.
For more detailed instructions and information, you can download the full manual from the iPGARD website at www.ipgard.com/documentation/.
Add New Comment