User Manual Q&AAnswer
Jan 24, 2025 - 10:17 PM
To configure VLANs on the Lenovo CE0128T Switch, you can follow these steps:
1. Connect to the switch using a console cable and a terminal emulation program.
2. Log in to the switch using the default username and password (refer to the product documentation for the default credentials).
3. Enter the command to enter the global configuration mode: configure terminal.
4. Create the VLANs by entering the command: vlan vlan-id.
5. Assign ports to the VLANs by entering the command: interface interface-id, followed by the command: switchport access vlan vlan-id.
6. Repeat step 5 for each port you want to assign to a VLAN.
7. Configure trunk ports to allow VLAN traffic by entering the command: interface interface-id, followed by the command: switchport mode trunk.
8. Repeat step 7 for each trunk port you want to configure.
9. Save the configuration by entering the command: copy running-config startup-config.
For more detailed instructions and additional configuration options, please refer to the Lenovo CE0128T Switch User Guide.
Add New Comment