User Manual Q&AAnswer
Jan 24, 2025 - 10:11 PM
To install and configure the Lenovo ThinkAgile HX7821 Certified Node, follow these steps:
1. Unpack the certified node and ensure all components are present.
2. Install the rail kit according to the instructions provided in the user guide.
3. Connect the power cables to the power supplies and the appropriate power source.
4. Connect the network cables to the network ports on the certified node.
5. Power on the certified node by pressing the power button.
6. Access the Lenovo XClarity Controller (XCC) Enterprise interface by entering the IP address of the certified node in a web browser.
7. Configure the network settings, including IP address, subnet mask, gateway, and DNS.
8. Update the firmware of the certified node using the XCC interface.
9. Install the desired hypervisor software (Nutanix Acropolis Hypervisor, VMware ESXi, or Microsoft Hyper-V) on the M.2 SSDs.
10. Configure the hypervisor and Nutanix software using the Nutanix Prism interface.
For more detailed instructions and information, refer to the Lenovo ThinkAgile HX7821 Certified Node User Guide.
Add New Comment