User Manual Q&AAnswer
Jan 24, 2025 - 10:01 PM
To install the Beacon LIGHTING 170316 LEDlux Infinity Maxi 150mm Conversion Plate, please follow the instructions below:
1. Start by ensuring that the power to the area where you will be installing the conversion plate is turned off.
2. Remove any existing light fixture or cover plate from the ceiling.
3. Take the LEDlux Infinity Maxi 150mm Conversion Plate and position it over the existing ceiling hole. Make sure it aligns properly and covers the hole completely.
4. Use a pencil or marker to mark the positions of the xxxx holes on the ceiling.
5. Drill pilot holes at the marked positions on the ceiling using an appropriate drill bit size.
6. Insert wall plugs into the pilot holes, if necessary, to provide additional support for the screws.
7. Align the conversion plate with the pilot holes and secure it to the ceiling using the provided screws. Use a screwdriver or drill to tighten the screws securely.
8. Once the conversion plate is securely attached, you can proceed to install your desired light fixture or cover plate onto the conversion plate.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific installation instructions provided by the manufacturer for your particular product.
Add New Comment