User Manual Q&AAnswer
Jan 24, 2025 - 09:59 PM
To install the STAHL 136714 Ex e Terminal Box, follow these steps:
1. Ensure that the installation area is suitable for the terminal box and meets the specified ambient temperature range (-60 °C to +40 °C for T6 or -60 °C to +55 °C for T5).
2. Determine the desired mounting location for the terminal box.
3. Use the provided mounting holes on the enclosure to secure it to the desired surface.
4. Connect the electrical cables to the appropriate terminals inside the terminal box. The terminal box is equipped with a 35 x 189 mm terminal rail for this purpose.
5. Tighten the cover screws of the terminal box using a torque of 4.5 Nm.
6. If required, additional accessories such as flanges or plates can be installed to customize the terminal box according to your specific needs. Refer to the manual for the appropriate part numbers and installation instructions.
7. Ensure that the terminal box is properly grounded by connecting the earth rail to a suitable grounding point.
8. Verify that all connections are secure and properly tightened.
Please note that the above instructions are a general guideline. For more detailed and specific installation instructions, refer to the STAHL 136714 Ex e Terminal Box Instruction Manual provided with the product
Add New Comment