User Manual Q&AAnswer
Jan 24, 2025 - 09:52 PM
To program and use the door-mounted keypad on the Eaton ECS96S1CAA-C1C47 Pump Control, please follow these steps:
1. Power on the soft starter by turning on the main power supply.
2. The door-mounted keypad will display the main menu. Use the arrow keys to navigate through the menu options.
3. To access the programming menu, press the "Enter" key.
4. Use the arrow keys to select the desired parameter to be programmed.
5. Press the "Enter" key to enter the parameter setting.
6. Use the arrow keys to adjust the parameter value.
7. Press the "Enter" key to confirm the parameter setting.
8. Repeat steps 4-7 to program other parameters as needed.
9. To start the motor, press the "Start" key. The motor will ramp up to the set speed.
10. To stop the motor, press the "Stop" key. The motor will decelerate and come to a stop.
11. To reset the soft starter, press the "Reset" key. This will clear any fault conditions and reset the device.
12. To exit the programming menu and return to the main menu, press the "Esc" key.
For more detailed instructions and information, please refer to the Eaton ECS96S1CAA-C1C47 Pump Control Door-Mounted Keypad Instructions manual.
Add New Comment