User Manual Q&AAnswer
Jan 24, 2025 - 09:36 PM
To install the DYNOJET PC6-16081 Power Commander 6, please follow the steps below:
1. Remove the seat of your vehicle.
2. Unplug the ECM (Engine Control Module).
3. Plug the PC6 wiring harness in-line of the ECM and the stock wiring harness.
4. Store the extra wiring and pair of connectors at the rear of the battery.
5. Secure the PC6 module to the top of the battery. You can tuck it under the stock rubber battery strap or use the supplied Velcro to secure it. Before attaching the Velcro, clean the surfaces using the alcohol swab provided.
6. Reinstall the seat.
For additional support and to ensure optimal performance, it is recommended to download the latest map files from the DYNOJET website at dynojet.com/tunes.
Please refer to the installation guide provided with the DYNOJET PC6-16081 Power Commander 6 for more detailed instructions and illustrations.
Add New Comment