User Manual Q&AAnswer
Jan 24, 2025 - 09:26 PM
To reverse the door on your POLAR G592 Cabinet Refrigerator Freezer, please follow the steps below:
1. Unplug the unit from the power source.
2. Remove the two screws fixing the control panel and open the panel.
3. Remove the right upper hinge and left upper hinge using a socket spanner.
4. Remove the spring hinge on the right top.
5. Remove the door from the right lower hinge and remove the auxiliary hinge.
6. Reverse the door and install the previously removed spring hinge on the left top and auxiliary hinge on the left bottom.
7. Remove the castor support board, right front castor, and left front castor consecutively. Then install back the right castor using a socket spanner.
8. For the hinge axis on the castor support board, remove it from the right and install it on the left.
9. Install the castor support board and left front castor on the left bottom.
10. Install the previously removed left top hinge on the right top using a socket spanner.
11. Install back the front panel and fix it with the screws. The door will now open from the right side.
Please note that if you encounter any issues or are unsure about the process, it is recommended to have a competent person or a Polar agent carry out the door reversal to avoid any potential damage or voiding of the warranty.
Add New Comment