User Manual Q&AAnswer
Jan 24, 2025 - 08:49 PM
To adjust the starting position of the Mover Wash Hex 12 light, follow these steps:
1. Press the Menu button on the light to access the menu.
2. Hold the Enter button for 3 seconds to enter the adjustment program.
3. Use the Up and Down navigation arrows to select either Pan or Tilt.
4. Press Enter to make your selection.
5. Use the Up and Down navigation arrows to fine-tune the starting position from -127 to 127 for both Pan and Tilt.
6. Press Enter to confirm your selection.
7. Press the Menu button to exit the adjustment program.
After following these steps, your Mover Wash Hex 12 light will start in the desired position going forward.
Add New Comment