User Manual Q&AAnswer
Jan 24, 2025 - 08:41 PM
To install the DYNOJET PC6-37002 Power Commander 6, please follow these steps:
1. Turn off the ignition before starting the installation.
2. Remove the seat to access the bike's ECM (Engine Control Module).
3. Unplug both of the stock connectors from the ECM.
4. Route the PC6 wiring harness beneath the frame cross member in the tail section.
5. Plug the PC6 wiring harness in-line with the ECM and the stock wiring harness. The connectors are indexed and can only be plugged in one way.
6. Store the PC6 module in the tail section near the tool kit. You can use the included Velcro strips to secure the module if desired. Before attaching the Velcro, clean the surfaces with the provided alcohol swab.
7. Reinstall the seat.
For more detailed instructions and illustrations, please refer to the provided installation guide that came with the DYNOJET PC6-37002 Power Commander 6.
Note: It is recommended to download the latest map files from the Dynojet website at dynojet.com/tunes for optimal performance.
If you have any further questions or need assistance, please consult the installation guide or contact DYNOJET customer support at 800-992-4993.
Add New Comment