User Manual Q&AAnswer
Jan 24, 2025 - 10:58 AM
To install the Blue Octave Home BDW52 in Wall Speakers, follow these steps:
1. Determine the location: Choose the desired location on the wall where you want to install the speakers. Ensure that there is enough depth behind the wall for proper installation.
2. Cut the hole: Use the provided template to mark the outline of the speaker on the wall. Carefully cut the hole using a drywall saw or a jigsaw, following the marked outline.
3. Prepare the wires: Run the speaker wires from your audio source (amplifier or receiver) to the installation location. Ensure that the wires are properly stripped and ready for connection.
4. Connect the wires: On the back of the speaker, you will find spring-loaded terminals. Connect the positive (+) and negative (-) wires to the corresponding terminals. Ensure a secure connection.
5. Mount the speakers: Place the speakers into the cut-out holes in the wall. The wall-lock mounting method on the integrated frame ensures a stable installation. Make sure the speakers are flush with the wall surface.
6. Secure the speakers: Use the provided screws to secure the speakers in place. Ensure that they are firmly attached to the wall.
7. Test the speakers: Once the installation is complete, connect your audio source to the speakers and turn on the system. Test the speakers by playing some audio to ensure they are functioning properly.
Note: It is recommended to consult a professional if you are unsure about the installation process or if you need assistance with any electrical wiring. Always follow the safety guidelines and instructions provided in the user manual.
Add New Comment