User Manual Q&AAnswer
Jan 24, 2025 - 10:49 AM
To connect the OSD Audio Pre-1 Preamplifier to your receiver, follow these steps:
1. Locate the white and red output connectors on the back of the Pre-1 marked "Output."
2. Connect the white and red RCA cables from the Pre-1's output to any available audio input on your receiver, such as CD, DVD, or AUX.
3. Make sure to match the left and right channels correctly, connecting the white cable to the left input and the red cable to the right input.
4. Once connected, set your receiver to the corresponding input source you connected the Pre-1 to.
5. Adjust the volume level on the Pre-1 using the Master Volume control to control the output volume to your receiver.
For more detailed instructions and information, please refer to the OSD Audio Pre-1 High Definition Preamplifier Install Guide.
Add New Comment