User Manual Q&AAnswer
Jan 24, 2025 - 10:15 AM
To set up the speakers for the Sony STRDH550 Channel 4K AV Receiver, follow these steps:
1. Place the speakers in the desired locations in your room. Make sure to position them according to the recommended guidelines provided in the user manual.
2. Connect the speakers to the receiver using speaker wires. Ensure that the positive (+) and negative (-) terminals on the speakers are connected to the corresponding terminals on the receiver.
3. Once the speakers are connected, you can use the receiver's speaker settings menu to configure the speaker setup. This menu allows you to specify the size, distance, and level of each speaker.
4. Access the speaker settings menu by pressing the "HOME" button on the remote control, selecting "Settings," and then choosing "Speaker Settings."
5. In the speaker settings menu, you can select the number of speakers you have connected (2, 5, or 7), specify the size of each speaker (small or large), set the distance of each speaker from the listening position, and adjust the speaker levels.
6. Follow the on-screen instructions and use the remote control to navigate through the menu and make the desired adjustments.
7. Once you have completed the speaker setup, you can perform a test to ensure that each speaker is functioning correctly. The receiver will play test tones through each speaker, allowing you to verify their placement and performance.
For more detailed instructions and illustrations, please refer to the user manual provided with the Sony STRDH550 Channel 4K AV Receiver.
Add New Comment