User Manual Q&AAnswer
Jan 24, 2025 - 10:09 AM
To pair the BC300 3D RF Emitter with your Optoma projector and glasses, please follow these steps:
1. Connect the BC300 emitter to your Optoma projector using the provided 3D sync cable.
2. On your Optoma projector, navigate to the OSD (On-Screen Display) menu and select the VESA option.
3. Make sure you are within the pairing zone, which is typically within a few meters of the emitter.
4. Turn on your Optoma 3D glasses.
5. The glasses should automatically sync with the emitter and the 3D content on the projector.
Note: If you are using the glasses for the first time, it is recommended to charge them for at least three hours before use. Also, ensure that the glasses are within the pairing zone range for successful syncing.
For more detailed instructions and information, please refer to the Optoma BC300 3D RF Emitter user guide provided.
Add New Comment