User Manual Q&AAnswer
Jan 24, 2025 - 10:02 AM
To install the Fostoria FES15241A FES-Series Heat Wave Electric Heater, follow these steps:
1. Assemble the handle: Remove the hardware securing the handle to the legs. Raise the handle until the holes align with the upper holes in the legs. Re-insert the hardware and fasten securely.
2. Mounting options: The FES models come mounted on a two-wheeled cart, which allows for easy movement over uneven surfaces. The YES models require some assembly and can be mounted on a wall or ceiling using the provided mounting bracket.
3. Wiring: The proper size SO-type feeder cable must be used for the electrical hook-up of this heater. Refer to the specifications in the manual for the appropriate cable size based on the model and length of the cable. The feeder cable or cable kit assembly must be made by licensed electricians only. Connect the green ground conductor on the feeder cable or cable kit to the grounding lug on the heater. Comply with all local electrical codes and the National Electric Code (NFPA70) when providing electrical power to these heaters.
4. Operating instructions: The Fostoria FES and YES series heaters are designed to circulate room air across their heating elements to gradually increase room temperature. The operation is controlled by a multi-function thermostat. The thermostat has a fan-only option and a heat option. Set the thermostat to the desired temperature and choose the appropriate setting for fan-only or heat.
Please refer to the user guide for detailed instructions, safety precautions, and additional information.
Add New Comment