User Manual Q&AAnswer
Jan 24, 2025 - 09:59 AM
To install the Fostoria YES15483E Heat Wave YES-Series Wall/Ceiling Electric Heater, follow these steps:
1. Assemble the hanger to the heater. No tools are required for this step.
2. Secure the wall/ceiling mounting bracket to a suitable surface that can support a minimum weight of 100 lbs continuously. Use 5/16" bolts and flat washers to mount the bracket.
3. Attach the unit to the mounting bracket following the instructions for your chosen mounting option. Make sure to install the rotating stops as shown in the manual.
4. If you are converting an FES unit to a YES unit, you can use the Fostoria kit Model WMK-YES (part number 04804102) for the conversion.
Please refer to the manual for more detailed instructions and illustrations on the installation process.
Add New Comment