User Manual Q&AAnswer
Jan 24, 2025 - 09:57 AM
To install the Fostoria FES10241CA FES-Series Heat Wave Electric Heater, follow these steps:
1. Assemble the handle: Remove the hardware securing the handle to the legs and raise the handle until the holes align with the upper holes in the legs. Re-insert the hardware and fasten securely.
2. Wiring: The proper size SO-type feeder cable must be used for the electrical hook-up of this heater. Refer to the specifications in the manual for the correct cable size. The feeder cable or cable kit assembly must be made by licensed electricians only. Connect the green ground conductor on the feeder cable or cable kit to the grounding lug on the heater. Comply with all local electrical codes and the National Electric Code (NFPA70) when providing electrical power to the heater.
3. Mounting: The FES models come mounted on a two-wheeled cart with wheels designed to be easily pushed or pulled over uneven surfaces. The YES models require some assembly. Follow the instructions in the manual for the specific model you have to complete the assembly and installation. Make sure to use the supplied mounting bracket and secure it to a suitable surface that can support the weight of the heater.
4. Finalize installation: Once the heater is mounted and the wiring is properly connected, make sure all the necessary components are in place, such as grills and access covers. Ensure that the heater is positioned according to the recommended clearances for safe and efficient operation.
Please refer to the user guide for more detailed instructions and safety precautions.
Add New Comment