User Manual Q&AAnswer
Jan 24, 2025 - 09:25 AM
To fill the water tank of the Sunbeam 32610046 Power Steam Handheld Steamer, follow these steps:
1. Place the steamer on a flat surface.
2. Press the water reservoir release button and slide out the water reservoir from the stand.
3. Take the water tank to a sink and pull the rubberized water-fill cover to open.
4. Pour tap water from the faucet into the water-fill opening until it reaches the Max water level in the water tank. Be careful not to spill water outside of the tank.
5. Close the water-fill cover and refit the water tank into the stand. Pull on the reservoir to ensure it is fully locked in position.
Note: It is not necessary to have a full tank of water for the steamer to generate steam. However, for best results, make sure the water tank is at least half full.
If you need to add water while steaming, unplug the steamer, wait until it cools, and follow the above steps. If you hear a cloud vibrating noise, it indicates that the water level is low and needs to be refilled.
Please refer to the owner's guide for more detailed instructions and safety precautions.
Add New Comment