User Manual Q&AAnswer
Jan 24, 2025 - 09:22 AM
To connect the Reliable 8000CJ Jewelry Steam Cleaner to a water source, please follow these steps:
1. Locate the water inlet labeled "WATER INLET" on the boiler (refer to figure 5, #1 in the manual).
2. Connect a rubber tube with a pressure capacity of at least 100 lbs to the water inlet. Make sure to tighten the rubber tube with two hose clamps.
3. Before inserting the rubber tube into the water inlet, flush a few liters of water through it to clean the conduit.
4. Connect the other end of the rubber tube to a tap with a hose holder.
5. Turn on the water tap to allow water to flow into the steam cleaner.
Please note that it is important to have a competent and trained person with technical knowledge perform the installation and connection of the steam cleaner to ensure safety and proper functioning.
For more detailed instructions and safety precautions, please refer to the Reliable 8000CJ Jewelry Steam Cleaner Instruction Manual.
Add New Comment