User Manual Q&AAnswer
Jan 24, 2025 - 09:16 AM
To connect your DUANDETAO RD-806 projector to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Identify the video output port on your computer. It could be VGA, HDMI, or DisplayPort, depending on your computer's specifications.
3. Locate the corresponding input port on the RD-806 projector. It supports VGA, USB, and HDMI connections.
4. Connect one end of the appropriate cable (VGA, HDMI, or DisplayPort) to the video output port on your computer.
5. Connect the other end of the cable to the corresponding input port on the RD-806 projector. For example, if you're using an HDMI cable, connect it to the HDMI input port on the projector.
6. Turn on your computer and the projector.
7. Use the projector's remote controller to select the correct input source. Press the "Input" or "Source" button on the remote until you see the input source that matches the port you connected your computer to (e.g., VGA, HDMI).
8. Your computer's display should now be mirrored or extended onto the RD-806 projector. You may need to adjust the display settings on your computer to optimize the resolution and aspect ratio for the projector.
Please refer to the user manual that came with your DUANDETAO RD-806 projector for more detailed instructions and troubleshooting tips.
Add New Comment