User Manual Q&AAnswer
Jan 24, 2025 - 05:51 AM
To set up the DVDO G3 PRO Wireless HDMI Adapter for Television, follow these steps:
1. Power down all devices.
2. Connect the HDMI cable from the Air3C-PRO receiver to your TV.
3. Connect the HDMI cable from the Air3C-PRO transmitter to your video source.
4. Mount the Air3C-PRO receiver on top of or behind your TV using the included mounts.
5. Connect the USB power supply to the transmitter using the supplied USB cable.
6. Connect the receiver to the TV's USB port using the supplied USB cable. If the TV's USB port does not provide enough power, use the supplied USB power adapter.
7. Power everything back up.
For more detailed instructions and visual references, please refer to the DVDO G3 PRO Wireless HDMI Adapter for Television User Guide, which can be downloaded from the official DVDO website at dvdo.com/air3CPRO.
Note: It is important to ensure that the DVDO Air3C-PRO Transmitter and Receiver are in the same room for optimal performance. The best performance is achieved within a range of 10 meters, and the signal can bounce off walls and ceilings. Additionally, the receiver should be positioned just visible over the top of the TV to provide a direct line-of-sight to the transmitter.
Please consult the user guide for further information on advanced configuration options and troubleshooting tips.
Add New Comment