How do I install the SIRMAN PPJ 10-20 SC 10kg Bench-Mounted Potato Peeler? (SIRMAN PPJ 10-20 Potato Peeler Instruction Manual SIRMAN PPJ 10-20 Potato Peeler Instruction Manual)

Answer

manuals.plus

Jan 24, 2025 - 05:46 AM


To install the SIRMAN PPJ 10-20 SC 10kg Bench-Mounted Potato Peeler, follow these steps:

1. Choose a suitable location for the machine. Ensure that the surface is wide enough to hold the machine and that it is well-leveled and dry.

2. Prearrange a discharge tube (ø60 mm.) under the machine and a drain trap on the floor or a floor grate to collect water or waste material.

3. Place the machine as near as possible to a faucet (ø12 mm.) for easy and safe attachment of the feeding tube.

4. Once the machine is in place, secure it by fastening it to the floor using the setscrews on the flanged feet.

5. Ensure that the installation environment has a maximum humidity of +5°C to +25°C and does not cause any malfunctioning of the machine.

6. For electrical connections, refer to the specific instructions based on whether the machine has a single-phase or three-phase motor. Make sure to follow the electrical connection guidelines and check that the grounding system works perfectly.

7. Perform an operational check by ensuring that the upper cover and discharge door are well-blocked. Press the START pushbutton and then the STOP pushbutton to check if the machine stops when the cover or discharge door is opened and restarts when closed.

8. Open the water flow using the faucet on the hopper to check the running of the machine.

Please refer to the instruction manual for more detailed information and diagrams on the installation process.