User Manual Q&AAnswer
Jan 24, 2025 - 05:44 AM
To install the COOAU D20S Dual Dash Cam Front and Inside in your vehicle, please follow the steps outlined in the user manual:
1. Mounting the Front Camera:
- Choose a suitable location on your windshield near the rearview mirror to mount the front camera.
- Clean the area with the provided alcohol pad and let it dry.
- Remove the protective film from the adhesive pad on the suction cup mount.
- Press the suction cup firmly against the windshield and lock it in place.
- Attach the front camera to the mount by sliding it downwards until it clicks into place.
2. Mounting the Inside Camera:
- Choose a suitable location on your windshield or dashboard to mount the inside camera.
- Clean the area with the provided alcohol pad and let it dry.
- Remove the protective film from the adhesive pad on the suction cup mount.
- Press the suction cup firmly against the windshield or dashboard and lock it in place.
- Attach the inside camera to the mount by sliding it downwards until it clicks into place.
3. Connecting the Power:
- Connect the included power cable to the USB port on the front camera.
- Route the power cable along the edge of your windshield and down to the power outlet in your vehicle.
- Plug the power cable into the power outlet.
4. Adjusting the Camera Angles:
- Adjust the front camera angle by rotating it on its mount.
- Adjust the inside camera angle by rotating it on its mount.
5. Powering On:
- Once the power is connected, the dash cam will automatically turn on and start recording.
Please refer to the user manual for more detailed instructions, illustrations, and troubleshooting tips.
Add New Comment