User Manual Q&AAnswer
Jan 24, 2025 - 05:39 AM
To mount the R2-94MAX speaker, you will need to attach the yoke to the support structure before mounting the loudspeaker enclosure. The yoke should be mounted using hardware specified by a structural engineer, load-rated for the intended use, and weather-resistant. Once the yoke is securely mounted, you can attach the R2-94MAX loudspeaker to the yoke using the provided hardware. Make sure to tighten the bolts enough to hold the loudspeaker in position, but do not use excessive force. Additionally, it is important to attach a safety cable to one of the open mounting points on the loudspeaker to ensure safety in case of any mounting failure. For more detailed instructions and illustrations, please refer to the "Mounting the Yoke" and "Mounting the R2-MAX Loudspeaker" sections in the Community R2-94MAX Full-Range 3-Way speaker user guide.
Add New Comment