User Manual Q&AAnswer
Jan 24, 2025 - 05:37 AM
To mount the R2-66MAX speaker, you will need to attach the yoke to a support structure. The yoke is pre-installed on the speaker. Determine the appropriate location and orientation for the speaker and mount the yoke to the support structure using hardware that is not included. Make sure to tighten the bolts enough to hold the speaker in position. Once the yoke is securely mounted, you can attach the speaker to the yoke by lifting it into place between the yoke arms and tightening the bolts to hold it in position. It is important to support the speaker during the mounting process to prevent injury or damage. Additionally, a safety cable should be attached to a suitable load-bearing point separate from the loudspeaker mounting point to ensure safety. Please refer to the installation section of the user manual for more detailed instructions and illustrations.
Add New Comment