User Manual Q&AAnswer
Jan 24, 2025 - 05:37 AM
To install the nVent HOFFMAN SHT Series Telescopic Ventilated Shelf, follow these steps:
1. Determine the desired height, width, and depth of the shelf based on your enclosure's requirements.
2. Ensure that you have the necessary SHTP profiles for full or partial depth installation. These profiles will be added to the enclosure's frame.
3. Mount the SHTP profiles to the enclosure's frame according to the provided instructions.
4. Place the telescopic zinc-plated steel shelf onto the SHTP profiles.
5. Ensure that the shelf is securely attached to the profiles and can slide in and out smoothly.
6. If necessary, adjust the position of the shelf to accommodate the installed components or equipment.
7. Verify that the shelf is properly aligned and level within the enclosure.
8. Once installed, the shelf can be easily extracted for better access to the mounted components or equipment.
Please refer to the nVent HOFFMAN SHT Series Telescopic Ventilated Shelf SHT Instruction Manual for more detailed installation instructions and illustrations.
Add New Comment