User Manual Q&AAnswer
Jan 24, 2025 - 05:34 AM
To program the Mandis shop RM-YD040 Replacement Remote Control to work with your Sony TV, please follow the steps below:
1. Turn on your Sony TV manually.
2. Point the remote control towards the TV.
3. Press and hold the "TV" button on the remote control until the LED indicator lights up.
4. Enter the 3-digit code for your Sony TV using the number buttons on the remote control. You can find the code for your specific Sony TV model in the instruction manual or on the Mandis shop website.
5. After entering the code, release the "TV" button. The LED indicator should turn off.
6. Test the remote control by pressing some of the basic functions like volume up/down or channel up/down. If the TV responds correctly, the programming is successful.
7. If the TV does not respond or if you do not have the correct code, you can try the code search method. Press and hold the "TV" button again, then press and hold the "SET" button simultaneously. The LED indicator will remain lit.
8. Press the "POWER" button on the remote control repeatedly until the TV turns off. Each time you press the "POWER" button, the remote control will send a different code to the TV.
9. Once the TV turns off, press the "TV" button to save the code. The LED indicator will turn off.
10. Test the remote control to ensure all functions are working correctly.
Please note that these instructions are general guidelines, and the specific steps may vary depending on your TV model. For more detailed instructions or troubleshooting, refer to the instruction manual provided with the Mandis shop RM-YD040 Replacement Remote Control or visit the Mandis shop website.
Add New Comment