User Manual Q&AAnswer
Jan 24, 2025 - 05:29 AM
To install the nVent HOFFMAN F1010GSH Support Hanger, please follow these steps:
1. Determine the desired location for the wireway installation on the floor or wall.
2. Ensure that the surface is clean and free from any debris or obstructions.
3. Measure and mark the appropriate height for the hanger based on your specific needs.
4. Use appropriate tools to securely attach the hanger to the surface. The hanger should be mounted at a height that allows the wireway to be properly supported.
5. Once the hanger is securely attached, place the wireway onto the hanger, ensuring that it is centered and level.
6. Secure the wireway to the hanger using the provided mounting hardware or any additional hardware necessary for your specific installation requirements.
7. Double-check the stability and alignment of the wireway to ensure it is properly supported by the hanger.
8. Proceed with the rest of your wireway installation, following the instructions provided in the wireway's instruction manual.
Please note that this is a general guide, and it is always recommended to refer to the specific instruction manual provided with the nVent HOFFMAN F1010GSH Support Hanger for detailed installation instructions and any additional safety precautions.
Add New Comment