User Manual Q&AAnswer
Jan 24, 2025 - 05:24 AM
Sure! Here is a step-by-step guide on how to install the ITC 21060-001 Color Module:
1. Safety Instructions:
- Before starting the installation, make sure to disconnect the power to avoid any accidents.
- Account for all the parts and destroy all packing materials to prevent any hazards to children.
- Ensure that the luminaire assembly is not installed closer than 6 inches from any combustible materials.
- If the attached wire leads are not rated to handle the maximum current, positive (+) outputs require a fuse.
2. Determine the installation location:
- Choose a suitable location for the color module, considering its dimensions (3.2”L x 2”W x 0.8”H).
- Ensure that there is enough room for access and wiring.
- Clean the back of the module and the installation location using alcohol wipes (not provided).
- Attach the double stick pads (included) to the back of the module.
- Remove the paper from the stick pads and firmly stick the module in place.
3. Mounting precautions:
- Do not mount the color module in an area where water can be splashed over it.
- Ensure that the module is installed in a dry and safe location.
4. Wiring the module:
- Refer to the wiring diagram provided in the manual.
- Follow the diagram to correctly wire the color module to your system.
- Make sure to connect the wires securely and according to the diagram.
For any further information or warranty details, you can visit the website www.itc-us.com/warranty-return-policy. If you have any specific questions or concerns, feel free to contact ITC at the provided phone number: 616.396.1355.
Please note that this answer is based on the information provided in the ITC 21060-001 Color Module Installation Guide. It is always recommended to refer to the manual for accurate and up-to-date instructions.
Add New Comment