User Manual Q&AAnswer
Jan 24, 2025 - 05:20 AM
To connect your Electrohome EB30 speakers to your source device, follow these steps:
1. Position the speakers with the Active Speaker on the right and the Passive Speaker on the left. If placing the speakers in a cabinet or on a shelf, position the front of the speakers as close as possible to the front edge of the shelf for optimum audio performance.
2. Connect the speaker wire to the spring clips on the back of the Active Speaker and connect the other end of the speaker wire to the spring clips on the back of the Passive Speaker. Ensure each wire is connected to the same color binding post on each speaker. Positive (+) to positive (+) and negative (-) to negative (-).
3. Connect the power cable to the back of the Active Speaker and connect the other end to a power outlet.
4. To use the RCA input, connect an RCA cable to your source device (Turntable, Smartphone, Computer...) and connect the other end of the RCA cable to the back of the Active Speaker. Press the Control xxxx to select the RCA input (Green LED). Adjust the volume on the EB30 as well as the source device.
5. To use Bluetooth pairing, press the Control xxxx to select the Bluetooth input (Blue LED). Pair your source device to "Electrohome EB30" in your device's Bluetooth settings. Use the Remote to control playback on your source device. Adjust the volume on both the source device and the EB30.
6. To use the AUX input, connect the AUX cable to your source device (Smartphone, Computer...) and connect the other end of the AUX cable to the back of the Active Speaker. Press the Control xxxx to select the AUX input (Yellow LED). Adjust the volume on the EB30 as well as the source device.
Please refer to the user guide for more detailed instructions and troubleshooting tips.
Add New Comment