User Manual Q&AAnswer
Jan 24, 2025 - 05:17 AM
To install the equip 650318 37 to 70 Inch Low Profile TV Wall Mount Bracket, please follow the steps below:
1. Start by identifying the suitable location on the wall where you want to mount your TV. Ensure that the wall can support the weight of both the bracket and the TV.
2. Use a stud finder to locate the studs in the wall. It is recommended to mount the bracket directly onto the studs for maximum stability. Mark the positions of the studs on the wall.
3. Hold the wall plate of the bracket against the wall at the desired height and align it with the marked stud positions. Use a level to ensure it is straight.
4. Mark the positions of the mounting holes on the wall using a pencil.
5. Drill pilot holes into the marked positions on the wall using an appropriate drill bit size for the wall material.
6. Attach the wall plate to the wall using the provided screws and washers. Make sure to tighten them securely.
7. Next, attach the brackets to the back of your TV. Ensure that the brackets align with the VESA mounting holes on the TV.
8. Lift the TV and carefully hook the brackets onto the wall plate. Make sure the TV is securely attached to the bracket.
9. Use the adjustment xxxx on the bracket to tilt the TV to your desired viewing angle. The bracket allows for a range of tilt action.
10. Once you have achieved the desired angle, use the easy-grip button to lock the TV in place.
11. Finally, double-check the stability of the TV and ensure that it is securely mounted on the bracket.
Please refer to the equip 650318 37 to 70 Inch Low Profile TV Wall Mount Bracket Owner's Manual for more detailed instructions, including diagrams and illustrations, to assist you with the installation process.
Add New Comment