User Manual Q&AAnswer
Jan 24, 2025 - 05:12 AM
To install an operating system on the iEi AFL3-12C-ULT3 Light Industrial Panel PC, you can follow these steps:
1. Prepare a bootable installation media for your desired operating system. This can be a USB flash drive or a DVD.
2. Connect the bootable installation media to one of the USB ports on the panel PC.
3. Power on the panel PC and press the appropriate key (usually F2 or Delete) to enter the BIOS setup.
4. In the BIOS setup, navigate to the "Boot" tab and set the boot priority to prioritize the USB or DVD drive where your installation media is connected.
5. Save the changes and exit the BIOS setup. The panel PC will restart.
6. During the restart, the panel PC will boot from the installation media. Follow the on-screen instructions to proceed with the operating system installation.
7. Once the installation is complete, remove the installation media and restart the panel PC.
8. The panel PC should now boot into the newly installed operating system.
For more detailed instructions and troubleshooting, please refer to the user guide provided with the iEi AFL3-12C-ULT3 Light Industrial Panel PC.
Add New Comment