How do I connect my Jabra Engage 75 Mono headset to my Aastra Open Phone 63 or 65 desk phone for remote call contr (Jabra Engage 75 Mono Headset Instruction Guide)

Answer

manuals.plus

Jan 24, 2025 - 05:03 AM


To connect your Jabra Engage 75 Mono headset to your Aastra Open Phone 63 or 65 desk phone for remote call control, please follow these steps:

1. Ensure you have the necessary prerequisites: Jabra 8800-00-93 electronic hook switch (EHS) cable AZ adapter (from Aastra/DeTeWe), DeTeWe Open Phone 63 or 65, OpenCom 100 from software 5.2, or OpenCom 1000 from software 3.2.

2. Plug one end of the phone cable supplied with the Jabra Engage headset into the socket marked with the blue phone icon on the Jabra base.

3. Plug the other end of the phone cable into the headset port of the AZ adapter.

4. Plug one end of the Jabra 8800-00-93 cable into the AUX port on the Jabra base.

5. Plug the hollow socket connector of the Jabra 8800-00-93 cable into the socket marked with the bell icon on the AZ adapter.

6. Plug the 6-pin western connector of the Jabra 8800-00-93 cable into the second receiver socket on the AZ adapter.

To configure your headset when connecting to a desk phone for the first time:

- For the Jabra Engage 75, follow the onscreen setup wizard on the base.
- For the Jabra Engage 65, the initial setup is complete after connecting the cables.

For more detailed instructions and information, please refer to the user manual located in the Technical Documents section of the Jabra Engage 75 Mono headset.

Additionally, you can use Jabra Direct, a free computer application, to learn more about your Jabra product. Jabra Direct allows you to adjust features and functions according to personal preference or company requirements. Make sure to update your Jabra product to get the latest performance. Visit jabra.com/direct for more information.

If you have further questions or need additional setup information, refer to the EHS cable/adapter type (GN1000) and clear dial tone switch (set to position "A") mentioned in the manual. Also, activate the Remote Headset function on your Open Phone device by navigating to Menu > Settings > Peripherals > Additional device selection > Remote Headset.

For more detailed troubleshooting or specific queries, please consult the official Jabra Engage 75 Mono headset support page at https://www.jabra.sg/supportpages/jabra-engage-75/9556-583-117/faq/d5ba0d09-456
2-442d-8f69-aa67d4cd5074.