User Manual Q&AAnswer
Jan 24, 2025 - 05:02 AM
To connect the ironing station to a water source, follow these steps:
1. Ensure that you have a tap with a hose holder available.
2. Connect a rubber tube with a pressure capacity of at least 100 lbs to the tap with the hose holder labeled "WATER INLET" on the boiler. Use two hose clamps to securely fix the rubber tube.
3. Before inserting the rubber tube into the water inlet, flush a few liters of water through it to clean the conduit.
Please note that the installation and use of this professional equipment should be done by competent and trained personnel with appropriate technical knowledge and understanding of applicable safety standards. Refer to the instruction manual for more detailed information on the installation process.
Add New Comment